SpectraLink IP-DECT 200 Installation And Configuration Manual Download Page 288

Page: 288 / 456

14215700-IG, Edition 15.0
May 2020, Original document

288

How to Generate License for Master Spectralink IP-DECT Server 6500

1. Order the license. Send your Purchase Order (PO) including the software part number and

the number of licenses needed to Spectralink Order Management via (EMEA and APAC)

[email protected]

or (NALA)

[email protected]

Note:

License required on the master:

Redundancy Master | IP-DECT Server 6000/6500 (part no. 14075250)

2. When your order is processed, Order Management will send you an email including an

Authentication Product Key for your software license. The e-mail contains a txt document
called “License.txt” and looks like this:

3. Find the System ARI Code for your master Spectralink IP-DECT Server 6500 to be used in

the License Key Generator. For more information, see

"Identifying ARI on Spectralink IP-

DECT/Virtual IP-DECT Server" on page 69

Note:

An ARI always start with 100 and then 8 number after, e.g. ARI: 10045035150.

4. Turn your browser to Spectralink Support portal

http://support.spectralink.com/

, and click the

License Key Generator link to open the License Key Generator.

Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Summary of Contents for IP-DECT 200









































































































































































































































































































































































































































































Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands

SpectraLink IP-DECT 200, Installation And Configuration Manual

Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands