SpectraLink IP-DECT 200 Installation And Configuration Manual Download Page 213

Page: 213 / 456

14215700-IG, Edition 15.0
May 2020, Original document

213

Field

Setting

User - User

PIN code (Optional)(Only visible
if Handset Sharing License is
loaded)

Enter a code in the PIN code field for added security to
prevent other users from linking a handset with your user
profile.

The PIN code associates the user with a handset. For
more information, see

"User Sign-in/Sign-out" on

page 316

. See also Lync/Skype for Business Inter-

operability Guide.

Standby text (Optional)

Enter a standby text.

Note

: Disallowed characters: <>\"

A standby text is a fixed label shown in the top left part of
the screen on the DECT handset when in idle state.

Note

: This feature is only available if Spectralink DECT

handsets are being used. If third party DECT handsets
are being subscribed, this feature is not supported.

Disabled (Optional)

If enabled, the user is disabled.

Note

: A disabled user cannot make calls from the hand-

set.

User - SIP

Username/Extension

Must contain information used for SIP registration etc.
E.g. the "user" in a SIP URI.

Note

: Allowed characters: a-z, A-Z, 0-9, -_.!~*'

()&=+$,;?/

Spectralink IP-DECT Server 200/400/6500 and Virtual IP-DECT Server One Installation and Configuration Guide

Summary of Contents for IP-DECT 200









































































































































































































































































































































































































































































Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands

SpectraLink IP-DECT 200, Installation And Configuration Manual

Search results

Summary of Contents for IP-DECT 200

Reviews:

Related manuals for IP-DECT 200

Brands by name

Popular brands