Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 49 / 378

Figure 3-5:
Views displayed during scenario execution
To display the views in successive order, press the view key. In the lower right corner e.g., View
2/6 may be displayed, indicating the current view/total number of views. The total number,
and content of views depends on the number of signals used in the scenario.
Note:
When you press the
exit
key to leave a menu, its settings will be taken into
use immediately, and all band- or satellite-specific offsets are discarded.
See "Running a Scenario" on page 102 to find out how you can interact with the system dur
ing scenario execution, and to learn which scenario settings can be adjusted .
3.4.2.1 View 1/x
View 1/x displays the scenario name , and information about the simulation GPS date and
time , current position , speed and direction , and elapsed time .
3.4.2.2 View >1/x
Views >1/x display information pertaining to the individual simulated satellites. Up to
8 channels are shown per view (the maximum number of channels is 64, depending on your
GSG model, and configuration).
The first line repeats the …
… GPS date and time (as in View 1/x ), and displays the …
… HDoP (Horizontal Dilution of Precision): A dimensionless number indicating the rel
ative quality of the calculated horizontal position, which is largely a function of the cur
rent satellite constellation. [A smaller number is better; the number will never be 0 or 2.]
The remaining lines are:
3.4 "Start" Menu
CHAPTER
3
•
User Manual GSG-5/6 Series Rev. 26
33