Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 250 / 378

Parameter
enum = {ON, OFF}
Example
SEND:
SOURce:NOISE:CONTrol ON
6.3.3.16 SOURce:NOISE:CONTrol?
Function
Get the noise simulation state.
Command Syntax
SOURce:NOISE:CONTrol?
Example
SEND:
SOURce:NOISE:CONTrol?
READ:
OFF
6.3.3.17 SOURce:NOISE:CNO
Function
Set the maximum carrier-to-noise density of the simulated signals.
Command Syntax
SOURce:NOISE:CNO <decimal>
Note
Setting not stored during scenario or 1-channel mode execution.
The actual C/N
0
of individual signals may be lower than this setting due to various reasons
(distance, elevation, modified by event, etc).
234
CHAPTER
6
•
User Manual GSG-5/6 Series Rev. 26
6.3 Command Reference