Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 150 / 378

To open an existing RSG trajectory:
Navigate to
File > Open…
, or click .
To create a
new
RSG trajectory:
1.
Enter a
Start position
, and an altitude in meters. Use a semicolon and a space as sep
arators:
Note that this data actually is not part of the trajectory, it is used only to assign a relative
location to the trajectory. You can later change this location, thereby moving the entire
trajectory to a different place (unless the trajectory includes geographic or ECEF pos
ition change commands).
2.
To add a new command to the list, highlight the command after which you would like to
insert the new command by clicking it. Then click the button. The RSG Command
Editor window will appear:
134
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
4.9 Studioview Tasks