Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 53 / 378

can re-configure to adapt them to your needs. You can also create your own scenarios using
the optional GSG StudioView Software.
Prior to running a scenario, you have to select it from the list of scenarios installed on the GSG
unit:
1.
In the Main Menu , highlight Select using the arrow keys, then press enter to display the
list of scenarios currently loaded:
2.
Scroll through the list by using the UP/DOWN arrow keys. Select the highlighted scen
ario by pressing enter or view : The first Configuration View will be displayed:
3.
If you want to modify the configuration of the scenario, see "Configuring a Scenario"
on page 103.
4.
To execute (= run) the selected scenario, press the start key: The scenario will be
launched (which will take a moment, depending on the complexity of the scenario
chosen), and then started automatically, unless you pressed the
[.]/hold key.
Below is a list of all configurable scenario parameters which can be accessed via the Select
Scenario menu, and which are discussed in the following topics.
Note: Options that are grayed out on your GSG unit are not installed.
"Start Time" on the next page
"Duration" on page 39
"Latitude, Longitude, Altitude" on page 40
"Trajectories" on page 40
3.5 "Select" Menu
CHAPTER
3
•
User Manual GSG-5/6 Series Rev. 26
37