Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 359 / 378

-320.51
6.5.3.47 SOURce:SCENario:PRANge?
Function
Queries a satellite’s range for a specific frequency band supported by that satellite for the sim
ulated user position or optionally an RTK base station position. The signals supported vary
based on the constellation and scenario configuration.
Command Syntax
SOURce:SCENario:PRANge? <satID>,<sigtype>,<location>
Notes
If no scenario is running, an error is returned.
If the satellite does not support the signal type, an error is returned.
If the base station location is not enabled, 0 values are returned.
Parameters
satID – GPS, Glonass, Galileo, BeiDou, QZSS, IRNSS and SBAS are supported. For more
information on the format, see "SOURce:ONECHN:SATid?" on page 241.
sigtype – one of the signal types supported by the satellite, allowed values are:
For GPS: L1CA, GPSL1CA, L1P, GPSL1P, L1PY, GPSL1PY, L1CAP, GPSL1CAP, L1CAPY,
GPSL1CAPY, L2P, GPSL2P, L2PY, GPSL2PY, L2C, GPSL2C, L5, GPSL5
Note that the signal types from the same group below share the same navigation bit
stream
L1CA, GPSL1CA, L1P, GPSL1P, L1PY, GPSL1PY, L1CAP, GPSL1CAP,
L2P, GPSL2P, L2PY, GPSL2PY
L2C, GPSL2C
L5, GPSL5
For Glonass: L1, GLOL1, L2, GLOL2,
For Galileo: E1, E5a, E5b
For BeiDou: B1, B2,
For QZSS: L1CA, L1SAIF (L1SBAS can be also used for L1SAIF)
For IRNSS: L5, IRNSSL5
For SBAS: L1SBAS
Location – user or base
6.5 RSG Command Reference
CHAPTER
6
•
User Manual GSG-5/6 Series Rev. 26
343