Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 235 / 378

SBAS – Satellite Based Augmentation System satellites
TRAJ – Trajectories
TRG – External Trigger
FN – Fixed bandwidth noise
VN – Variable Bandwidth Noise (GSG-55 only)
INTF – Interference channels
MP – Multipath
NOW – Simulate Now
PPS – PPS output (1/10/100/1000)
HV – High Velocity/Altitude, Extended Limits Option
L2 – L2 Frequency band, enables P-code for GPS L1 and L2, is required for GLONASS
L2
L2C – GPS L2C
L5 – L5 Frequency band, enables GPS L5, is required for Galileo E5a/b, BeiDou B2
L6 – L6 Frequency band, required for BeiDou B3 / Galileo E6
RTK – Virtual Basestation and RTCM messages
GAL – Galileo, enables Galileo E1, is required for Galileo E5a/b
GLO – GLONASS, enables GLONASS L1, is required for GLONASS L2
RSG – Real-time Scenario Generation
BDS – BeiDou, enables B1, is required for BeiDou B2
RP – Record and Playback
JAM – Jamming Package
SEN – Sensor Simulation
QZ – QZSS
VIS – Visibility/Terrain Obscuration
IRN – IRNSS L5
6.3.1.5 *OPC
Operation Complete
The Operation Complete command causes the device to set the operation complete bit in the
Standard Event Status Register when all pending selected device operations have been fin
ished.
*OPC
and
*OPC?
commands can be used with overlapping commands, i.e., commands which
take long time to finish. In GSG such commands are starting/arming scenario execution
6.3 Command Reference
CHAPTER
6
•
User Manual GSG-5/6 Series Rev. 26
219