Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 283 / 378

Note
Only available during scenario execution.
Parameter
satID – GPS, Glonass, BeiDou, QZSS and SBAS are supported, the format is explained under
"SOURce:ONECHN:SATid?" on page 241.
sigtype – One of the signal types supported by the satellite, allowed values are:
For GPS : L1CA, GPSL1CA, L1P, GPSL1P, L1PY, GPSL1PY, L1CAP, GPSL1CAP, L1CAPY,
GPSL1CAPY, L2P, GPSL2P, L2PY, GPSL2PY, L2C, GPSL2C, L5, GPSL5
Note: The signal types from the same group below share the same nav
igation bit stream.
L1CA, GPSL1CA, L1P, GPSL1P, L1PY, GPSL1PY, L1CAP, GPSL1CAP
L2P, GPSL2P, L2PY, GPSL2PY
L2C, GPSL2C
L5, GPSL5
For Glonass : L1, GLOL1, L2, GLOL2
Note:
The signal types from the same group below share the same nav
igation bit stream.
L1, GLOL1
L2, GLOL2
For Galileo : E1, E5a, E5b
For BeiDou : B1, B2,
For QZSS : L1CA, L1SAIF (L1SBAS can be also used for L1SAIF)
For SBAS : L1SBAS
sfid – For GPS L1 and L2P signals: subframe id
For GPS L2C and L5 signals: message type
For Glonass: frame id
For Galileo E1 and E5b signals: word id
For Galileo E5a: page id
For BeiDou: subframe id
For QZSS L1CA: subframe id
6.3 Command Reference
CHAPTER
6
•
User Manual GSG-5/6 Series Rev. 26
267