Spectracom GSG-5 series, User Manual With Scpi Manual

Page: 136 / 378

2.
Click the Start button to start the transfer. The unit will first transfer the file, and then
update the firmware.
Uploading a Scenario
1. In order to upload a scenario , first ensure that the scenario file (.
scen
file) and any tra
jectory, event, or navigation file associated with the scenario are stored in the Stu
dioView repository. By default this location is:
C:\Users\username\Documents\Spectracom\GSG StudioView\Rep-
ository
Note: The username location may depend on your version of the Windows
operating system you are using.
2.
In the StudioView
Uploader
window, click
Select file for uploading
, and navigate to
the scenario file in the repository.
3.
Click the
Start
button to start the upload. The software will automatically upload the scen
ario file as well as any trajectory, event, or navigation file associated with that scenario,
and place the files in the proper locations in the GSG.
4.9.6 Transferring Files With StudioView
If there is a need to transfer individual files from your StudioView PC to a connected GSG or
vice versa, StudioView's File Manager is the tool of choice.
Note: Note that for uploading scenarios the Uploader (see "Uploading Stu
dioView Files" on page 118 ) is the preferred tool over the File Manager , since the
Uploader automatically uploads all files belonging to a scenario.
Transferring a File using the StudioView File Manager
1.
Open the File Manager tool by navigating to Tools > File Manager , or click .
120
CHAPTER
4
•
User Manual GSG-5/6 Series Rev. 26
4.9 Studioview Tasks