5 | Cleaning and Maintenance
STp.1120n User’s Guide
124
Cleaning the Automatic Loading Sensor
The automatic loading sensor should be cleaned whenever necessary.
1. Remove the labels.
2. With a can of compressed air, spray the sensor to remove dust and debris.
3. Repeat as necessary.
Cleaning the Top-of-Form Sensor
The Top of Form sensor should be cleaned whenever necessary.
1. Remove the media and ribbon.
2. With a can of compressed air, spray both (2) sensors to remove dust and debris.
3. Repeat as necessary.
Cleaning the Label Low Sensor
The Label Low Sensor should be cleaned whenever necessary.
1. Remove the media and ribbon.
2. Wipe the sensor with the clean, lint-free cloth.
3. Repeat as necessary.
Cleaning the Printhead
For optimum performance, the printhead should be routinely cleaned with factory-
approved cleaning supplies. When using the cleaning pen, follow the instructions located
on the packaging.
Cleaning Cards
Cleaning cards are effective at removing many common adhesives and contaminants
from printheads.
1. Remove the media and ribbon.
2. Insert the cleaning card under the printhead.
3. Select Menu / Tools / Maintenance / Cleaning and then select Clean Now.
4. Slide the cleaning card in and out to scrub the printhead.
5. Repeat as necessary.
Summary of Contents for STP.1120N
