Source Technologies STP.1120N, User Manual

Page: 118 / 158

4 | Menu System
STp.1120n User’s Guide 108
To return to the default settings, select General > Reset Defaults > Serial .
d. General
Select from the following to change the General communications settings:
Services
The following services may be enabled or disabled:
• Enable Network Time Protocol
• Enable Telnet
• Enable SSH
Table 15: Services
Host Timeout
The Host Timeout refers to the print job timeout in seconds before moving on to
monitor other ports.
Table 16: Host Timeout
Reset Defaults
The Reset Defaults function allows the user to reset the communications to the
default settings.
To reset the communication settings to the factory default settings, select one of the
options and select the green Accept button to make the change.
• Ethernet
• Wireless
• Serial
Protocol None
Hardware
Software
Both
None
Services Default
Enable Network Time Protocol Enabled
Enable Telnet Enabled
Enable SSH Disabled
Function Range Default
Host Timeout 1 to 300 seconds 1
Functions Values Ranges Default