Source Technologies STP.1120N, User Manual

Page: 58 / 158

3 | Connections and Setup
STp.1120n User’s Guide 48
Removing Ribbon Wrinkle
1. Center the supply ribbon core so the ribbon overlaps the media equally on both
sides.
2. Verify there are no folds or creases in the ribbon.
3. Adjust the front ribbon shield to the middle position of the mounting slot.
Figure: 3 - 44 Ribbon Shield
4. Set the printer to print ten (10) consecutive Quality Labels from the Test menu.
5. Print the labels.
6. Check for ripples drifting left or right in the ribbon between the ribbon supply and the
cam roller.
Front Ribbon Shield