Source Technologies STP.1120N, User Manual

Page: 122 / 158

4 | Menu System
STp.1120n User’s Guide 112
Table 19: Security Settings
Security Descriptions
• Secure - When the “Secure” option is selected, changes to the advanced settings
and user tools will require a password.
• Secure All - When the “Secure All” option is selected, changes to any settings will
require a password.
Note: The factory default password is the number “0.”
Remove Security
To remove security, select the lock icon to the right of the Change Password utility. Type
your password and then select the green Accept button. To confirm, select the green
Accept button.
Maintenance
To adjust the following maintenance settings, select the Maintenance button. The
Maintenance settings include:
• Cleaning
• Upgrade
• Odometers
a. Cleaning
Cleaning should be routinely performed. The maintenance alarm is set by the user in
thousands of inches.
Enter the desired maintenance reminder interval. Once a fault appears directing the user
to clean the printhead, insert a factory approved cleaning card under the printhead and
select Clean Now.
The Elapsed field displays the number of inches, in thousands, since the last cleaning.
Table 20: Maintenace Settings
Functions Options
Security Level None
Secure
Secure All
Maintenance Settings Ranges Actions Default
Maintenance 0k to 1000k in. 0 (never)
Clean Now Select Clean Now