Source Technologies STP.1120N, User Manual

Page: 21 / 158

11 STp.1120n User’s Guide
3 Connections and Setup
Connections
Power
To connect the printer to a viable power source, please follow the steps below.
Caution: Ensure the printer power switch is off before connecting the AC power and
data/network connectivity cables to the printer.
Caution: Adhere to all environmental requirements when installing and using the printer.
Use of the product in an unsuitable environment may affect print quality and the
durability of the printer and may void the manufacturer’s warranty.
1. Place the printer on a suitable level surface capable of securely supporting 50lbs.
2. Connect the AC power cord to the AC power inlet on the back of the printer.
3. Connect the AC power cord to AC utility power.
Data
Printer data connectivity can be accomplished by the following standard or optional
interfaces:
• USB
• Ethernet/Network
• Serial (Optional)
• GPIO (Optional)
Connect the appropriate interface cables for your network configuration.
Media Loading
The printer is designed to print with the media being center-biased. There are three
different media mounts available including two media hangers and one media hub.
The standard cantilever mount requires the manual center-alignment of the media.The
optional media hanger synchronizes the adjustment to facilitate the centering of the
media. The optional media hub is designed to center-bias the media as well.
Please consult your reseller to obtain the appropriate media.
Note: The printer should be connected to AC power and running during media loading.