Source Technologies STP.1120N, User Manual

Page: 53 / 158

Connections and Setup | 3
43 STp.1120n User’s Guide
Note: For thicker labels, remove the label from the backing and insert the backing into
the groove.
Figure: 3 - 37 Media Rewinder
5. Reinstall the metal clasp into the grooves.
Perform the following steps to set the rewinder direction:
1. Select Menu > Basic > Printer Mode .
2. Select one of the three options.
Note: Upon exiting the utility, a prompt will ask the user to accept the changes or reject
them.
Top-of-Form Sensor
This printer is designed to use several types of media. The top-of-form sensor can read
media characteristics from the center to the left inside edge (viewing from the front of the
printer). Setting the top-of-form sensor to read specific media characteristics is done in
the control panel.