Version 5.2
Sourcefire 3D System User Guide
259
Inserting and Removing 8000 Series Modules
Before You Begin
Appendix C
Sample Module Lever (closed with screw in hole)
Before You Begin
Prepare to insert or remove your module using the following guidelines:
•
Identify all appliance and module parts.
•
Identify the slots where you want to install your NetMods.
TIP!
You can insert the NetMod into any available, compatible slot.
•
Identify the correct slots for your stacking modules. See
•
3D8140: slot 3
•
3D8250/8260 primary slot: slot 5
•
3D8270 primary slots: slots 5 and 1
•
3D8290 primary slots: slots 5, 1, and 4
•
3D82xx secondary: slot S
•
Confirm that the EMI gaskets are in place.
•
Unplug all power cords from the appliance.
WARNING!
You
cannot
hot-swap modules. You must power down and
unplug
both
power cords from the appliance before inserting or removing
modules.
Removing a Module or Slot Cover
Use proper electrostatic discharge (ESD) practices such as wearing wrist straps
and using an ESD work surface when handling the modules. Store unused
modules in an ESD bag or box to prevent damage.
Lever
Screw hole with T8 Torx screw
