Source fire Sourcefire 3D System Installation Manual Download

Page: 186 / 280

Version 5.2

Sourcefire 3D System Installation Guide

186

Hardware Specifications

Sourcefire 8000 Series Devices

Chapter 6

Quad-Port 1000BASE-T Copper Configurable Bypass NetMod

The quad-port 1000BASE-T copper configurable bypass NetMod contains four

copper ports and link, activity, and bypass LEDs.

Use the

Copper Link/Activity LEDs

table to understand the link and activity LEDs

on copper interfaces.

Use the

Copper Bypass LEDs

table to understand the bypass LEDs on copper

interfaces.

Link LED

Activity LED Bypass LED

Copper Link/Activity LEDs

TATUS

ESCRIPTION

Both LEDs off

The interface does not have link and is not in bypass

mode.

Link amber

The speed of the traffic on the interface is 10Mb or

100Mb.

Link green

The speed of the traffic on the interface is 1Gb.

Activity blinking

green

The interface has link and is passing traffic.

Copper Bypass LEDs

TATUS

ESCRIPTION

Off

The interface does not have link and is not in bypass

mode.

Steady green

The interface has link and is passing traffic.

Steady amber

The interface has been intentionally brought down.

Blinking amber

The interface is in bypass mode; that is, it has failed open.

Summary of Contents for Sourcefire 3D System

























































































































































































































































































Search results

Summary of Contents for Sourcefire 3D System

Reviews:

Related manuals for Sourcefire 3D System

Brands by name

Popular brands

Source fire Sourcefire 3D System, Installation Manual

Search results

Summary of Contents for Sourcefire 3D System

Reviews:

Related manuals for Sourcefire 3D System

Brands by name

Popular brands