Version 5.2
Sourcefire 3D System Installation Guide
116
Using the LCD Panel on a Series 3 Device
Network Configuration Mode
Chapter 5
4.
Press the right arrow key to manually configure the network.
•
For IPv4, the LCD panel displays the IPv4 address. For example:
IPv4 Address: - +
194.170.001.001 X
•
For IPv6, the LCD panel displays a blank IPv6 address. For example:
IPv6 Address: - +
0000:0000:0000:00 X
The first line on the panel indicates whether you are editing the IPv4 or IPv6
address. The second line displays the IP address you are editing. A cursor
underlines the first digit, and represents the digit you are editing. The two
symbols correspond with the multi-function keys to the right of each row.
Note that the IPv6 address does not fit completely on the display. As you edit
each digit and move the cursor to the right, the IPv6 address scrolls to the
right.
5.
Edit the digit underlined by the cursor, if needed, and move to the next digit in
the IP address.
•
To edit the digit, press the minus (-) or plus (+) keys on the top row to
decrease or increase the digit by one.
•
To move to the next digit in the IP address, press the right arrow key on
the bottom row to move the cursor to the next digit to the right.
With the cursor on the first digit, the LCD panel displays the cancel and right
arrow symbols at the end of the IP address. With the cursor on any other
digit, the LCD panel displays the left and right arrow symbols.
6.
When you finish editing the IPv4 or IPv6 address, press the right arrow key
again to display the check mark ( ) key to accept the changes.
Before you press the right arrow key, the function symbols on the display
looks like the following sample:
IPv4 Address: - +
194.170.001.001 X
After you press the right arrow key, the function symbols on the display looks
like the following sample:
IPv4 Address: X
194.170.001.001
7.
Press the check mark key to accept the changes to the IP address.
For IPv4, the LCD panel displays the following:
Subnet Mask: - +
000.000.000.000 X
For IPv6, the LCD panel displays the following:
Prefix: - +
000.000.000.000 X
