Source fire Sourcefire 3D System Installation Manual Download Page 229

Page: 229 / 280

Version 5.2

Sourcefire 3D System Installation Guide

229

Safety and Regulatory Information

Regulatory Information

Chapter 8

California to cause cancer, and birth defects or other reproductive harm. Wash

hands after handling.

Statement 13

WARNING!

The following label indicates this product contains hazardous moving

parts. Keep away from moving fan blades.

Regulatory Information

The regulatory information for each of the appliances is described in its own

section:

•

Sourcefire Defense Center 750/1500/3500 Information

on page 229

•

Sourcefire 3D500 Information

on page 230

•

Sourcefire Series 3 Information

on page 232

Sourcefire Defense Center 750/1500/3500 Information

This product complies with the following safety standards and certifications:

Safety Standards

The following information applies to the DC750/1500/3500:

•

UL60950 - CSA 60950(USA / Canada)

•

EN60950 (Europe)

•

IEC60950 (International)

•

CB Certificate & Report, IEC60950 (report to include all country national

deviations)

•

GS License (Germany)

•

GOST R 50377-92 - License (Russia)

•

Belarus License (Belarus)

•

Ukraine License (Ukraine)

•

CE - Low Voltage Directive 73/23/EEE (Europe)

•

IRAM Certification (Argentina)

•

GB4943- CNCA Certification (China)

•

FCC (Class A Verification) - Radiated & Conducted Emissions (USA)

•

CISPR 22 - Emissions (International)

Summary of Contents for Sourcefire 3D System

























































































































































































































































































Search results

Summary of Contents for Sourcefire 3D System

Reviews:

Brands by name

Popular brands

Source fire Sourcefire 3D System, Installation Manual

Search results

Summary of Contents for Sourcefire 3D System

Reviews:

Brands by name

Popular brands