Version 5.2
Sourcefire 3D System Installation Guide
118
Using the LCD Panel on a Series 3 Device
System Status Mode
Chapter 5
System Status Mode
The LCD panel’s System Status mode displays monitored system information,
such as link state propagation, bypass status, and system resources. You can also
change the LCD panel’s brightness and contrast in System Status mode.
The following table describes the information and options available in this mode.
To enter System Status mode and view monitored system information:
1.
In Idle Display mode, press any multi-function key to enter the main menu.
The main menu appears:
Network Config
System Status
System Status Mode Options
O
PTION
D
ESCRIPTION
Resources
Displays the CPU utilization and free memory available.
Note that Idle Display mode also shows this information.
Link State
Displays a list of any inline sets currently in use and the link
state status for that set. The first line identifies the inline
set, and the second line displays its status (normal or
tripped). For example:
eth2-eth3:
normal
Fail Open
Displays a list of the bypass inline sets in use and the
status of those pairs, either normal or in bypass.
Fan Status
Displays a list and the status of the fans in the device.
Diagnostics
Accessible after pressing a specific key sequence available
from Sourcefire Support.
W
ARNING
!
Do
not
access the diagnostics menu without the
guidance of Sourcefire Support. Accessing the diagnostics
menu without specific instructions from Sourcefire Support
can damage your system.
LCD Brightness
Allows you to adjust the brightness of the LCD display.
LCD Contrast
Allows you to adjust the contrast of the LCD display.
