Sony PFM-32C1, Operating Instructions Manual

Page: 100 / 348

48
(GB)
Specifications
Specifications
Video processing
Preset signal See page 26 (GB).
Sampling rate 13.5 MHz to 140 MHz
Panel system AC-type Plasma Display Panel
Display resolution 852 dots (horizontal)
×
1 024 lines
(vertical)
Pixel pitch 0.84 (horizontal)
×
0.39 (vertical)
mm ( 1 ⁄
16
×
1 ⁄
32
inches)
Picture size 715.68 (horizontal)
×
399.36
(vertical) mm (28
3
⁄
16
× 15
23
⁄
32
inches)
Panel size 32-inch (diagonal 820 mm)
Inputs and Outputs
INPUT1/INPUT2
RGB/YUV D-sub 15-pin (female) (
×
2) (See
“Pin assignment” on page 49
(GB).)
AUDIO Stereo minijack 500 mVrms,
high impedance
SPEAKER
7W + 7W (6 ohms), direct
unbalanced impedance: 6-16
ohms
CONTROL S IN/OUT
REMOTE (RS-232C)
D-sub 9-pin type (
×
1)
VIDEO (NTSC, PAL, SECAM, NTSC4.43,
PAL60, PAL-M)
1)
COMPOSITE IN BNC-type (
×
1)
Composite video, 1 Vp-p ±2 dB
sync negative, 75-ohm
(automatic termination)
Y/C IN Mini DIN 4-pin type (
×
1)
Y (luminance): 1 Vp-p ±2 dB sync
negative, 75 ohms terminated
C (chrominance): Burst
0.286 Vp-p ±2 dB (NTSC),
75 ohms terminated
Burst 0.3 Vp-p ±2 dB (PAL),
75 ohms terminated
AUDIO IN Stereo minijack
500 m Vrms,high impedance
COMPOSITE OUT
BNC-type (
×
1) Loop-through
Safety regulations
UL1950, CSA No. 950 (c-UL),
FCC Class B, IC Class B,
EN60 950 (NEMKO), CE,
C-Tick
General
Power requirements
100 V to 240 V AC, 50/60 Hz,
3.2 A to 1.6 A
Power consumption
270 W
Operating conditions
Temperature: 0 °C to 35 °C
(32 °F to 95 °F)
Humidity: 20
%
to 90
%
(no condensation)
Atmospheric pressure: 700 to
1 060 hPa
Storing/transporting conditions
Temperature: –10 °C to +40 °C
(14 °F to 104 °F)
Humidity: 20
%
to 90
%
(no condensation)
Atmospheric pressure: 700 to
1 060 hPa
Dimensions 838
×
521
×
97 mm
(33
×
20
1
⁄
2
×
3
7
⁄
8
inches)
(w/h/d, excluding projections)
Mass 22 kg (48 lb 8 oz)
Supplied accessories
AC power cord (1)
AC plug holder (2)
Cable holder (5)
Remote Commander RM-971 (1)
Size AA (R6) batteries (2)
Operating instructions (1)
.........................................................................................................................................................................................................
1) The PFM-32C1E is not equipped with VIDEO connectors. For the PFM-32C1E, composite video and Y/C input can be
input to the display when the BKM-B10 video input adaptor (not supplied) is installed in the display.