Sony Docomo Xperia Z1fSO-02F, Instuction Manual

Page: 107 / 245

105 Apps
･
The data in the IC card
*1
or the docomo mini
UIM card
*2
may be lost or altered because of
the malfunction of the terminal (when we
repair your terminal etc., as we cannot repair it
with data remained, you are required to erase
the data yourself ). For support such as
reissuance, restoration, temporary
preservation or transfer of data, contact
Osaifu-Keitai compatible service providers.
For important data, be sure to use a service
with backup service.
･
If the data in the IC card or the docomo mini
UIM card is lost, altered or damaged by any
means related to Osaifu-Keitai compatible
service such as malfunction or model change,
DOCOMO assumes no responsibility for the
loss of data.
･ If the terminal is stolen or misplaced,
immediately contact Osaifu-Keitai
compatible service provider for an advice.
*1 Data saved in the IC card installed in the
Osaifu-Keitai compatible terminal
*2 Data saved in the docomo mini UIM card
1
From the Home screen,
u
[Osaifu-Keitai].
･
For the first activation, on the initial
setup screen, mark "Agree to the Osaifu-
Keitai Usage Regulations"
u
[OK].
2
Select a service you want to use
from a service list.
･
Download an application compatible
with service site or service.
3
Hold mark over the IC card
reader.
❖
Information
･
You can scan and write data to or from an IC card
reader without activating Osaifu-Keitai compatible
application.
･
The function is available even if the terminal is off,
but it may not be available when the terminal has
been turned off for a long time or battery level is low.
･
You can use Osaifu-Keitai compatible service even
when the PIN code cannot be unlocked or PIN
locked.
･
Note that when you do not subscribe sp-mode,
some functions of Osaifu-Keitai compatible service
may not be available.
Using "Osaifu-Keitai
compatible service"