CSM-200
6-1
Section 6
Power Supply Cable and UPS
Introduction
No power cord is supplied with the CSM-200. Prepare power cords beforehand.
The CSM-200 is supplied in two different versions depending on the internal power supplying system of
the CSM-200.
Refer to the illustration below to check the required number of the power cords.
(1) Cables for console
Fig. 1 indicates the system that contains the single power input system. Prepare the two cords recom-
mended in Section 6-1.
Fig. 2 indicates the system that contains the dual power input systems. Prepare the four cords recom-
mended in Section 6-1.
However, if redundant power supplies for ROBOT and for DRIVE (product name: CSMA-PSL and
CSMA-PSD) are not installed, only two cords are sufficient for use.
(2) Cables for PCU
Prepare the two cords recommended in Section 6-1.
Power Supply
Rated power consumption
.
CSM-200B/200BF/200BS/100B/100BF/100BS/60B/60BF/60BS (with two drives installed)
Robot section: 240 VA
Drive section: (two drives, one switching hub, and DRIVE IF): 90 VA
PCU section: HP Proliant DL360 G3 (one unit): 325 W / HP Proliant DL360 G4 (one unit): 460 W
HP Proliant DL360 G5 (one unit): 535 W / HP Proliant DL360 G5 (one unit): 458 W
HP Proliant DL360 G6 (one unit): 327 W / HP Proliant DL360 G7 (one unit): 300 W
.
CSM-200B/200BF/200BS/100B/100BF/100BS/60B/60BF/60BS (with 12 drives installed)
Robot section: 240 VA
Drive section: (two drives, one switching hub, and DRIVE IF): 410 VA
PCU section: HP Proliant DL360 G3 (one unit): 325 W / HP Proliant DL360 G4 (one unit): 460 W
HP Proliant DL360 G5 (one unit): 535 W / HP Proliant DL360 G5 (one unit): 458 W
HP Proliant DL360 G6 (one unit): 327 W / HP Proliant DL360 G7 (one unit): 300 W
.
CSM-200D (with no drive installed): 26 VA
.
CSM-200D (with 12 drives installed): 410 VA
(Fig.2)
(Fig.1)
Single power input system
Dual power input systems
AC inlet
for ROBOT standard
AC inlet
for DRIVE standard
AC inlet
for ROBOT standard
AC inlet
for DRIVE standard
AC inlet
for ROBOT redundant
AC inlet
for DRIVE redundant
Breaker switch
for ROBOT
Breaker switch
for DRIVE
