4-23
CSM-200
6.
Tighten both of the Basic storage system and the extension console with the eight hexagon head cap
(M4
x
8) bolts supplied with the extension console.
7.
When more than one consoles are expanded each other, use a caliper and measure the dimensions
between [A]-[A] of the X-reference pins of next consoles. Measure the dimensions between [A]-[A]
at both of the top stage (L1) and bottom stage (L2). (Write down the measured values in the follow-
ing table.)
8.
Connect the two flat cables (50-pins and 26-pins) coming from the Basic storage system to the
connectors of the extension console.
Table 1
M4
x
8
26 pin
50 pin
M4
x
8
L
X reference
pins [A]
X reference
pins [A]
X reference
pins [A]
Caliper
Basic dimensions
L1
L2
Difference (L1-L2)
Accumulative differences
B : Basic storage system
EX : Extension console
B-EX1
EX1-EX2
EX2-EX3
EX3-EX4
EX4-EX5
EX6-EX7
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
EX5-EX6
40 mm
Specification :
±
2 mm
