CSM-200
3-3
Slope
Open end
wrench (27
x
30)
Accessory box
6.
Open the bottom tray and remove the frame (frame
side use).
7.
Remove the two slopes, open-end wrench (27
x
30)
and accessory box.
n
Details of the accessories packed in the accessory box are
described in Section 3-2-2.
Frame (frame side use)
Bottom tray
3.
Release the lock of the ten P-joints in the front, and
remove the ten P-joints in the front starting from the
bottom P-joint, one after another.
4.
Remove the Frame (front).
5.
Release the lock of the two P-joints in the rear, and
remove the two P-joints.
LOCK
O
P
EN
P joint
LOCK
OPEN
Frame (front)
P joint
