4-107
CSM-200
4-3. Installing the Optional Equipment
4-3-1. Power Supply
CSMA-PSL (for robot)
1.
Open the front door. (Refer to “4-2-1. Opening the Outer Cabinets”.)
2.
Remove the four screws (PWH4
x
8) and remove the blank panel (24 V).
3.
Insert the CSMA-PSL and install it using the four screws that were removed in step (2).
4.
Turn on the POWER switch of the CSMA-PSL.
5.
Changing the settings of the Power unit from the display panel on the basic storage system
(1) Select Setup from MENU.
(2) Change “Library P/S [s]” to “Library PS [w]”.
(3) Check whether the POWER DOWN error message is displayed on the PSC when the power
switches of the standard or redundant CSMA-PSL are turned off alternately. Also confirm that
errors of both are not displayed simultaneously.
Blank panel
(24V)
PWH4
x
8
PWH4
x
8
PWH4
x
8
PWH4
x
8
CSMA-PSL
