4-2 (E)
BVP-E30/E30P M-V1
Camera unit
Storing
(Step 4)
Storing
(Step 1)
Reading
(Step 2)
Initializing
(Step 5)
Calling
(Step 3)
Current Operator
File Data
Output to hardware
Memory stick
Preset Operator File
Preset Operator File
Factory-set
value
Fig. 4-2. Operating Procedure for Operator Files
4-2. Operator File
Operator File stores data in the memory stick.
Storing and reading data are implemented using the setup menu.
m
.
Operator file data stored in the memory stick cannot be read when the power is just turned ON.
.
The current operator file data is retained even when the power is turned off by the power switch.
.
Before storing the data in the memory stick, make sure that the LOCK switch on the memory stick is in
OFF position.
Storing (Refer to step 1 of Fig. 4-2.)
Using OPERATION Menu of This Unit
Stores the current status in the memory stick.
Reading (Refer to step 2 of Fig. 4-2.)
Using OPERATION Menu of This Unit
