2-9 (E)
BVP-E30/E30P M-V1
Shoulder pad
V shoe bracket
M3
x
8
K4
x
10
Hexagon cap screws
with stopper
M3
x
8
Lock lever
CN1201
Switch panel
SW-1075 board
INCOM switch
RET switch
BTP2.6
x
6
+
B2.6
x
6
+
B2.6
x
6
2-4. Replacing the RET/INCOM Switch
1.
Remove the three screws, and remove the switch
panel.
2.
Disconnect the harness from the connector CN1201 of
the MB-953 board.
3.
Remove the three screws, and remove the SW-1075
board.
4.
Desolder the switch to be replaced, and replace it.
5.
Reassemble the parts in the reverse order of removal.
2-5. Removing the V Shoe Bracket
1.
Release the lock lever.
2.
Slide the shoulder pad until the heads of the hexagon
cap screws with stopper become visible.
3.
Loosen the two hexagon cap screws with stopper, and
remove the shoulder pad.
4.
Remove the seven screws, and remove the V shoe
bracket.
