BVP-E30/E30P M-V1
4-7 (E)
Reading the Reference File from the Memory Stick (Refer to step 3 of Fig. 4-4.)
Using FILE/MAINTENANCE Menu of This Unit
(1) Reference File data stored in the camera can be changed by reading the Reference File data stored in
the memory stick.
(2) The Reference File data in the memory stick cannot be applied to the camera when the data are just
read. For applying the data, adjust the level automatically.
[MAINTENANCE]
→
[AUTO|SETUP]
→
[AUTO|LEVEL]
n
Reference File data stored in the memory stick cannot be read when the power is just turned on.
Storing the Reference File to the Memory Stick (Refer to step 1 of Fig. 4-4.)
Using FILE Menu of This Unit
Stores Reference File stored in the camera in the memory stick.
Initializing All File Items (Refer to step 4 of Fig. 4-4.)
Using FILE Menu of This Unit
Initializing Only the Specified Item (Refer to step 4 of Fig. 4-4.)
Using FILE Menu of This Unit
(1)
[FILE]
→
[FILE|CLEAR]
→
[10|SEC|CLEAR]
→
[ON]
(2) Display the page containing the desired items to be initialized of the reference files in the setup menu.
(3) Move “
→
” to the item to be initialized using the MENU SELECT knob, and keep pressing the
MENU SELECT knob about 10 seconds at “?” state until “REF CLEAR “ is displayed.
n
The 10 SEC CLEAR setting returns to OFF when the power is turned ON.
Calling
(Step 2)
Readng from
memory stick
(Step 3)
Storing in
memory stick
(Step 1)
Initializing
(Step 4)
Storing
(Step 1)
Camera unit
Current paint data
Reference File
Reference File
factory-set value
(Initial value 0)
Output to hardware
Fig. 4-4. Operating Procedure for Reference Files
Memory stick
