1-18 (E)
BVP-E30/E30P M-V1
1-12. Setting Scene File Number
The number of scene files that can be registered can be
changed (to 5 or 32) using the SERVICE menu of this unit.
The number of scene files can be stored in the internal
memory of this unit, memory stick, and IC memory card
(when MSU is used).
However, pay attention to the following when changing the
number of scene files again after it is changed.
When the number of scene files is switched from
5 to 32:
Indefinite data is registered in the values of scene files 6 to
32. Be sure to register new data again before using the
scene files.
When the number of scene files is switched from
32 to 5:
The data registered in scene files 6 to 32 is deleted. The
deleted data cannot be restored.
m
.
This setting corresponds only to MSU-700A/750 and
RCP-730 series.
.
Each scene file have no compatibility among the camer-
as if their scene file number differs.
How to change
Change the scene file number using the SETUP page in the
SERVICE menu.
Refer to Section 5-1-6 to display of the SERVICE menu.
Menu setting:
MENU: SERVICE
PAGE: SETUP
ITEM:
SCENE FILE TYPE
→
5 or 32
