96
S
ettings
S
O-01D_English
❖
Information
･
You can also switch on/off of the Airplane mode by
pressing and holding
p
for over a second to
switch to the Phone options menu, then tapping
[Airplane mode].
･
Even if Airplane mode is on, Wi-Fi and Bluetooth
function can be turned on.
Using the Wi-Fi function, you can connect to
an access point for your home, company
network or public wireless LAN services to
use mail and Internet.
･
Even when Wi-Fi is on, packet
communication is available. However, while
you connect Wi-Fi network, Wi-Fi comes
first.
･
When a Wi-Fi network is disconnected,
connection is automatically switched to a
3G/GPRS network. Note that packet
communication fee applies for using 3G/
GPRS network.
･
Turn the Wi-Fi function to off when you do not
use Wi-Fi to cut battery power consumption.
Before using Wi-Fi
To use Wi-Fi, turn on Wi-Fi and search
available Wi-Fi network, then connect it.
･
To access the Internet using Wi-Fi, connect
to Wi-Fi network in advance.
❖
Information
･
Make sure to receive enough signal strength for
using Wi-Fi. The signal strength of the Wi-Fi
network varies by the location of the terminal.
Moving closer to the Wi-Fi router might enhance
the signal strength.
■
Reception interference caused by
Bluetooth devices
Bluetooth devices and wireless LAN
(IEEE802.11b/g/n) use the same
frequency band (2.4GHz). If you use
Bluetooth devices near a wireless LAN
device, reception interference may occur
or the communications speed may lower.
Also, you may hear noise or have a
connection problem. Communication may
be interrupted or sound may be lost while
streaming data, etc. In these cases, do
the following:
･
Keep the terminal and Bluetooth device
to be connected wirelessly over 10
meters away from a wireless LAN
device.
･
Within 10 meters, turn off the Bluetooth
device to be connected.
About Wi-Fi
SO-01D_(E).book 96 ページ ２０１１年１０月２０日 木曜日 午後１時６分
