100
S
ettings
S
O-01D_English
Tethering stands for using mobile devices
such as smartphone as modem to allow USB
compatible devices or wireless LAN devices
to access the Internet.
❖
Information
・
Packet communication charge when using
tethering varies depending on the charging plan
you use. Subscription of packet flat-rate service is
highly recommended.
If you subscribe packet flat-rate service, packet
communication charge is treated as
"communications connected to an external device
such as a PC". If tethering is enabled, all packet
communication charge is treated as
"communications connected to an external device
such as a PC" even if any external device is not
connected.
Make sure to deactivate tethering as soon as
communication with an external device is
completed.
For details on usage charge, etc., refer to
http://www.nttdocomo.co.jp/english/
・
For the details on tethering, from the Settings
screen (P.93), tap [Wireless & networks]
[Tethering & portable hotspot] [Help].
S
etting U
S
B tethering
Connecting the terminal to the included
microUSB cable, and using it as a modem,
you can connect USB device to the Internet.
1
From the
S
ettings screen (P.93),
tap [Wireless & networks]
[Tethering & portable hotspot].
2
Connect the terminal to a PC with a
microU
S
B cable (P.33).
・
When you connect a USB cable for
the first time, driver software for the
terminal is installed to the PC. Wait for
a while until installation is completed.
A confirmation screen for installation
of PC Companion software appears
when the driver software installation is
completed.
3
Tap [
S
kip].
・
The terminal is connected to a PC in
"Media transfer mode (MTP)", USB
connection mode set by default.
4
Tap [U
S
B tethering].
5
Check the cautions displayed, tap
[OK].
・
[USB tethering] is marked.
❖
Information
・
System requirements (OS) for USB tethering are as
follows. A required driver is automatically installed.
- Microsoft Windows 7
- Microsoft Windows Vista
- Microsoft Windows XP
・
Set USB connection mode to "Media transfer mode
(MTP)" when connecting the terminal and a PC
using microUSB cable.
Using tethering function
SO-01D_(E).book 100 ページ 2011年10月20日 木曜日 午後1時6分