SonicWALL CDP 6.0, Administrator'S Manual

Page: 67 / 272

Configuring the System Settings
52
SonicWALL CDP 6.0 Administrator’s Guide
Step 7
Click Accept .
Note
It may take several seconds for GMS to contact MySonicWALL to register the CDP.
Registration Tasks on the CDP Appliance
After the GMS registration completes, you can perform the local registration tasks on the CDP
appliance. For more information on CDP registration, see the
SonicWALL CDP Getting Started
Guide for your CDP appliance.
To perform local CDP registration tasks:
Step 1
In GMS, in the left pane, select the CDP unit.
Step 2
Navigate to Policies > General > Status .
Step 3
In the right pane, locate the Registration Code for use on the local CDP appliance.
Step 4
On the management system for the CDP appliance, point your browser to the SonicWALL CDP
Web Management Interface and log in with the default credentials, admin/password.
Step 5
Navigate to the System > Registration/Licenses screen.
Step 6
On the Registration tab, enter the Registration Code obtained from GMS in the Registration
Code field.
Step 7
Click the Register button.
Configuring the Offsite Service
The procedure for configuring the downstream CDP appliance to back up data and policy
information to the SonicWALL CDP Portal or to an upstream CDP appliance is provided in this
section.
For information about restoring files from an offsite CDP appliance, see the “Restoring Data
from Offsite” section on page 57 .
For information about managing and restoring data from an offsite CDP appliance by using the
Agent User Interface as an administrator, see the
“Using the Agent UI as Administrator” section
on page 96 .
For more detailed information about the SonicWALL CDP Offsite and Site-to-Site Backup and
Restore feature, see the
“Site-to-Site Service Overview” on page 201 and subsequent sections.