SonicWALL CDP 6.0, Administrator'S Manual

Page: 261 / 272

Command Line Interface Reference
246
SonicWALL CDP 6.0 Administrator’s Guide
Solution : Execute the following command, where the new gateway IP address is
10.10.100.1:
SNWLCLI> route --add 0.0.0.0/0 --destination 10.10.100.1
snmp
SNWLCLI> snmp <on | off>
This variable holds the SNMP status. The current value will be displayed if the command is
used without an argument.
Arguments :
<on>: enables SNMP
<off>: disables SNMP
Type : System Variable
Defaults : Current configuration
sshd
SNWLCLI> sshd <on | off>
This variable holds the sshd status. The current value will be displayed if the command is
used without the argument.
Arguments :
<on>: enables sshd
<off>: disables sshd
Type : System Variable
Defaults : on
start
SNWLCLI> start <appservices | postgresq | stunnel | webui >
This function starts services. It takes a service name as an argument. The list of services
is application-specific.
Arguments :
< service >: service to start
Type : Executable
Defaults : none
Related Commands : stop , restart
stop
SNWLCLI> stop <appservices | postgresq | stunnel | webui >
This function stops running services. It takes a service name as an argument. The list of
services is application-specific.
Arguments :
< service >: service to stop
Type : Executable
Defaults : none
Related Commands : start , restart