socomec Green Power 2.0 60, Installation And Operating Manual

Page: 41 / 52

41
Green Power 2.0
60-80 kVA - Ref.: IOMMASGPXX06-EN 06
ENGLISH
10. TECHNICAL SPECIFICATION
Models 60 80
Input/Output phases 3/3 3/3
Electrical specification - Input mains
Input mains voltage Vin 3ph + N 400 -10% +20% (P.F. 1) (up to -40% @ 45% of nominal load)
Input mains frequency Hz 45-65
Input mains power factor ≥ 0.99
(3)
Total harmonic input current distorsion (THDi) ≤ 3% (@: Pn, Resistive load, Mains THDv = 1%)
Electrical specification - Auxiliary mains
Auxiliary mains voltage Vin Nominal output voltage ±15% (±20% if GENSET is used)
Auxiliary mains frequency Hz 50/60 +/-2% selectable (±8% if GENSET is used)
Electrical specification - External battery
Battery voltage range V bat from +/-175
(4)
up to +/-360
(5)
Electrical specification - Output
Output voltage (three phase + neutral) V 380/400/415
(1)
selectable
Frequency Hz 50/60 selectable
Nominal apparent power (Sn) (0 °C ÷ 35 °C) kVA 60 80
Nominal active power (Pn) (0 °C ÷ 35 °C) kW 60 80
Overload
(@ 25 °C; Vin > 380;
Vbat > 216)
(2)
• 10 minutes
• 5 minutes
• 1 minute
• 30 seconds
kW
67.5
75
81
90
90
100
108
120
Crest factor @ 25 °C ≥ 2.7
Total harmonic output voltage distortion (THDv) ≤ 1% (Ph/Ph); ≤ 2% (Ph/N) (@: Pn, Resistive load)
Environment
Operating temperature °C 0 to 35 (15 to 25 recommended for longer battery life)
Storage temperature °C -5 to +50 °C
Relative humidity % 95% condensation-free
Altitude (max) m 1000 without derating (3000 max)
Acoustic noise at 1 m dBA < 58 (< 55 rear excepted) < 59 (< 56 rear excepted)
Required cooling capacity m
3
/h 510
Dissipated power (max) W 4240 5382
Dissipated power (max) BTU/h 14475 18375
Dimensions and Weight - single cabinet
Dimensions (W x D x H) mm 600 x 800 x 1400
Weight kg 210 220
Standards
Safety EN 62040-1/A1, EN 60950-1
Type and performance EN 62040-3 (VFI-SS-111)
EMC EN 62040-2 (Category C3)
Product certification CE - TÜV-SÜD
Protection level IP20
1. 360 V with Pout = 90% Pn.
2. Initial Condition Pout ≤ 80% Pn
3. Pout ≥ 50% Sn.
4. @ Battery Fully Discharged. Call SOCOMEC support service.
5. @ Battery Fully Charged. Call SOCOMEC support service.