socomec Green Power 2.0 60, Installation And Operating Manual

Page: 19 / 52

19
Green Power 2.0
60-80 kVA - Ref.: IOMMASGPXX06-EN 06
ENGLISH
5. HUMAN MACHINE INTERFACE
5.2. MIMIC PANEL OVERVIEW
5.2-1
Status bar (always displayed)
UPS Rated Power (kVA)
Unit panel reference
Operating modes:
Normal (Normal mode), Eco (Eco mode), En. Saver (Energy
Saver mode – parallel confi gurations only), Standby (Standby
program mode), Service .
Unit status:
• Displayed messages: ON MAINT. BYPASS, IMMINENT STOP,
ON BATTERY, BATTERY TEST, ON INVERTER, ON AUTO
BYPASS, UNIT AVAILABLE, UPS IN STANDBY, LOAD OFF.
- Flashing red : imminent UPS shutdown
- Red : Load not powered or battery circuit open
- Flashing yellow : UPS in standby mode or maintenance alarm
is active
- Yellow : UPS on battery or the UPS points out a particular
working mode
- Flashing green : battery test is in progress
- Green : the load is supplied
- Grey : inactive UPS
5.2-2
Alarms area
Alarms area
Present when an alarm is active.
Enter
ALARMS menu to display the complete alarms list (see chapter 9).
5.2-3
Status icons
Key icon:
Displayed if the keypad has been locked.
Time:
UPS current time (hours and minutes, with ':' fl ashing).
USB icon:
Displayed if a USB memory stick is inserted.
It must be formatted with FAT32 fi lesystem.
Network icon:
Displayed if a valid link has been established on the ethernet.
Flashes when a remote host is communicating with the UPS.
Foreword: status icons and Time are only visible if there are no pending
alarms, as the alarm bar overwrites the icons when active.