39
ENGLISH
Green Power 2.0
60-80 kVA - Ref.: IOMMASGPXX06-EN 06
ENGLISH
9.2. UPS
ALARMS
• A01: BATTERY ALARM
Failure or problem on the battery circuit. Check the battery switch is closed.
• A18: OVERLOAD BLOCKING INVERTER
Reduce the load rate applied to the UPS and reset the alarms.
• A20: WRONG CONFIGURATION
Error in the configuration parameters. Please contact the support service.
• A30: UPS STOPPED FOR OVERLOAD
Reduce the load rate applied to the UPS and reset the alarms.
• A42: REMOTE SERVICE ALARM
This alarm indicates that a critical anomaly has occurred on the UPS. Where a maintenance contract with the Remote Monitoring
option is in place, the procedure for analysing the UPS via remote connection will be automatically activated by your service centre
provider.
• A44: PERIODIC SERVICE CHECK UP
The equipment must undergo regular inspections by the support service in order to ensure optimum performance and efficiency. If the
Scheduled Inspection
signal appears (
) on the mimic panel, the equipment should be inspected by a suitably trained technician.
• A51: OPTION BOARD GENERAL ALARM
Check if the optional cards are correctly inserted in the slots.
• A59: BATTERY CIRCUIT OPEN
Battery switch open.
• A60: FAN FAILURE
Fault in the ventilation system. Check that the air inlet at the front and the air outlet at the back of the UPS are not obstructed.
9. TROUBLESHOOTING
Summary of Contents for Green Power 2.0 60
