Snow Hawk 600HO, Set-Up, Service And Shop Manual

Page: 17 / 207

GENERAL INSTRUCTIONS 1 - 7
Roll the two O-rings down and pull the two white plastic
collars down over the fork legs. To ensure that they will not
interfere, let them hang loose at the base of the fork leg.
o Remove the circular fork disc
o De-latch the two rubber latches on the sides of the belly
pan (towards the rear of the vehicle)
o De-latch the four rubber latches on the bottom of the
belly pan.
o Descend the belly pan to floor level; most maintenance
can be performed with the belly pan in this position.
However, if it is required to completely remove the belly
pan, remove the single bolt attaching the ski to the fork.
At this point, a second person can lift the front of the
vehicle slightly and the belly pan can be slid out from
underneath.