Snow Hawk 600HO, Set-Up, Service And Shop Manual

Page: 51 / 207

ENGINE REMOVAL 4-7
o
Loosen the hose clamp farthest towards the PTO side
on the PTO side heat exchanger and disconnect the
hose there. This hose runs from the head of the engine
to the inlet of the tunnel-mounted heat exchangers and
should remain connected to the engine when removing.
o
Now that all of the peripheral equipment has been
disconnected, unscrew and remove the 4 bolts (per
side) that secure the engine plate to each side of the
chassis.
o
PTO side bolts (x 4)
o
MAG side bolts (x 4)
o
Now the engine can be completely removed from the
vehicle.