Snow Hawk 600HO, Set-Up, Service And Shop Manual, Page: 14 / 207

GENERAL INSTRUCTIONS 1 - 4
OPERATING INSTRUCTIONS
Pre-driving inspection
◆
WARNING
A pre-driving inspection is of the utmost importance
before using the vehicle. Do not start the machine until
you are sure all mechanisms and controls are functioning
properly. Failing to proceed in the prescribed manner may
result in severe injuries or even death.
o
Make sure the track and the idler wheels are not frozen and
that they move freely.
o
Depress the brake lever and make sure the brake is fully
engaged before the end of the lever touches the handlebar.
The lever must return to its original position as soon as it is
released.
o
Turn the twist throttle control a few times to make sure it
functions properly. The control must return automatically to
the idle position as soon as it is released.
o
Make sure the engine cutoff switch, the stop light, the
headlight (high and low beams) and the tail light are in good
working order.
Starting the engine
o
Put the cap of the engine cutoff (tether) switch in place. The
other end of the cord must be securely attached to the
driver.
o
If the engine is cold, use the choke control.
0. Normal position (not activated)
1. Intermediate choke position
2. Full choke position
o
Start the engine by firmly pulling the handle of the rewind
starter.
◆
WARNING
Do not touch the throttle control while starting the engine.