FUEL SYSTEM 3 - 9
▼
CAUTION
After throttle slide reassembly, proceed with a leak test.
See below for procedure.
# 7 NEEDLE
Remove carburetor cover
# 12
.
Loosen needle retainer screw
# 33
.
Fully open throttle and hold in this position for the following step.
Move aside needle retainer
# 34
.
1. Needle retainer moved aside.
Turn dual carburetor assembly upside down to free needle # 7.
Take care not to loose plastic washer # 9 under needle circlip #
10.
# 2 INTAKE SPICKET
Unscrew throttle slide cover screws
# 70
.
Open throttle 3/4 wide and hold it there.
Lift throttle slide covers bottom first until they are free from
carburetor bodies. Then, slide them out.
1. Lift bottom first
2.
Slide out
After inserting throttle slide cover in place and be-fore installing
screws, ensure O-ring gasket is properly seated in its groove
especially in the area around vent nipple. See illustration at
right.
1. Needle
retainer
2.
Ensure O-ring gasket is properly seated in nipple area.
Summary of Contents for 600HO
