![background image](http://html1.mh-extra.com/html/snell-and-wilcox/prefix-cpp100/prefix-cpp100_operators-manual_1309061070.webp)
CPP100
SECTION 6
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
6.38
Recall User
The eight user defined memories can be recalled by
using the
Recall
sub-menu. Simply choose the
desired memory and press the SELECT button.
When a user defined memory is recalled, ALL
parameters and configuration information including
the source are set as per the memory.
Recall Preset
This sub-menu contains a set of pre-defined
memory settings for specific applications. These
settings provide a guide for the filters which are
appropriate for particular types of noise. The actual
settings for each filter should be evaluated
depending on the material being processed. When
these memories are recalled only the Filter
configuration and control parameters are recalled.
So if the source is composite A, recalling the Film
Artefact preset memory will not change the decoder
or video set up, only the filters will be changed.
The Preset memories are:-
Satelite Noise
Film Artefacts
Video Artefacts
F & V Artefacts
MPEG Lo bps Fil
MPEG Med bps Fi
MPEG Hi bps Fil
MPEG Lo bps Vid
MPEG Med bps Vi
MPEG Hi bps Vid
Factory
The final entry in the
Recall Preset
sub-menu is a
Factory setting. This can be used to return all
configuration and control parameters to the default
state when the unit was shipped. Note that the Net
address and Net Name are reset when you do a
Recall Factory.
Set Name
To change the characters in the memory name, the
SELECT button is used to move the cursor along
one character to the right. The SPINWHEEL is used
to change the character. The available characters
are shown in the menu structure.
When the desired memory name has been entered
press the SELECT button until the cursor is at the
end of the text entry field. Pressing the SELECT
button once more will return to the Memory menu.