Snell & Wilcox Prefix Cpp100, Operator'S Manual

Page: 67 / 114

CPP100 SECTION 6
CPP1OPS 25/10/06 www.snellwilcox.com Version 1 Issue 6 6.35
high because the read side XTAL will be set to the
nominally correct freqency but will not be phase
locked.
Genlock Warnings
If there is a Genlock error the GREEN status LED in
the Genlock button will flash.
REF Reference is wrong standard.
Check that the input standard is set
correctly, and that the reference is the
correct standard.
This is displayed on the bottom line of the front
panel display at the right hand side.
Summary of Genlock Operating Modes
Input Reference Genlock
Mode Output
(locked to)
PAL not connected On Input
PAL PAL On Reference
PAL
NTSC On Input
NTSC not connected On Input
NTSC
PAL On Input
NTSC NTSC On Reference
625 SDI not connected On Input
625 SDI
PAL On Reference
625 SDI NTSC On Input
525 SDI
not connected On Input
525 SDI PAL On Input
525 SDI NTSC On Reference
Note: Whenever the Genlock mode is OFF the
output is always free-running.
Monitor Menu
The On Screen Status Display can be turned
ON/OFF directly from the front panel by pressing
the MON button.
Status Display
To go directly to this menu PRESS and HOLD the
MON button on the front panel.
None / System / Filters /
Decoder (Comp I/P)
Default None
The Status Display provides an on screen status
display of the PREFIX settings and configuration.
The status display information is sent to the
MONITOR output only. The style of this display can
be selected in the
Display Style sub-menu.
Display Style
Black/White Black text on white
background
White/Black White text on black
background
White/Clear White text on clear
background (picture)
Default Black/White
Panel Display
Normal / Recursive / Median / Spatial /
Linear / Scratch / Enhancer / EDH Check /
Network / Auto Loop
Default Normal
The panel display can be controlled using the front
panel buttons as well as the menu structure.
PREV Panel display auto loop
PRESET Next display page
PREV Previous display page
HOME Normal panel display
Panel Display (cont)
Monitor
▶
Status Display
▶
Display Style
▶
Panel Display
▶
EDH Status
▶
EDH Reset
▶
Key Window
▶
Border