![background image](http://html1.mh-extra.com/html/snell-and-wilcox/prefix-cpp100/prefix-cpp100_operators-manual_1309061111.webp)
CPP100
SECTION 10
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
10.2
Warning Messages
These are displayed on the bottom line of the display
at the right hand side.
REF
Reference is wrong standard.
Check that the input standard is set
correctly, and that the reference is the
correct standard.
NET
Network error.
Check that the RollCall
network is
properly connected and terminated.
This may occur briefly when a new unit is
added to the network.
EDH
EDH errors on SDI input.
Check upstream SDI equipment and
cabling for errors or damage.
The above messages relate to causes which may
indicate a problem with a connection to the unit such
as the input, reference or the network.
XIL
Hardware error
XLB
Hardware error
VID
Video error
SYS
Internal network error
BUF
Internal comms error
The above messages relate to unit warnings that may
occur briefly in normal operations, for example when
the unit is reconfigured. If these messages
persistently occur please contact Snell & Wilcox for
assistance.