![background image](http://html1.mh-extra.com/html/snell-and-wilcox/prefix-cpp100/prefix-cpp100_operators-manual_1309061035.webp)
CPP100
SECTION 6
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
6.3
Filters
REC
TRANS
MEDIAN SPATIAL
LINEAR SCRATCH ENHANCE
SETUP
MEM
CONFIG
NET
PATTERN
MON
INPUT
GLK
FILTERS
The set of seven ‘FILTERS’ buttons on the front panel can be used to access and control the filters.
Button
Press
Press and Hold
REC
On / Off
Goto Recursive filter menu
TRANS
On / Off
Goto Recursive filter menu
MEDIAN
On / Off
Goto Median filter menu
SPATIAL
On / Off
Goto Spatial filter menu
LINEAR
On / Off
Goto Linear filter menu
SCRATCH
On / Off
Goto Scratch filter menu
ENHANCE
On / Off
Goto Enhancer filter menu
Each of the filter push buttons has a green LED indicator. When the LED is illuminated the Filter is ON, when
the LED is extinguished the Filter is OFF.
CONFIG
The set of seven ‘CONFIG’ buttons on the front panel can be used to access and control the set up and
configuration of the unit.
Button
Press
Press and Hold
INPUT
Goto
Video-Source
menu
No Action
SETUP
Goto
Video
menu
Goto
Decoder
menu ( Comp I/P )
MEM
Goto
Memory-Recall User
menu
Goto
Memory-Recall Presets
menu
NET
Goto
System
menu
Goto
System-Net Name
menu
GLK
Genlock
ON/OFF
Goto
Genlock
menu
MON
On Screen
Status Display
ON/OFF
Goto
Monitor-Status Display
menu
PATTERN
Pattern ON/OFF
Goto
Video-Pat Select
menu
The GLK, MON and PATTERN buttons have a green LED indicator. When the LED is illuminated the feature is
ON, when the LED is extinguished the feature is OFF. If the GLK button is flashing it means that there is a
Genlock error. For further information see the paragraph on Genlock in the following section.
The INPUT and NET buttons have a red LED indicator. If these LEDs flash it means there is an input signal or
network error. For further information see the following section.