![background image](http://html1.mh-extra.com/html/snell-and-wilcox/prefix-cpp100/prefix-cpp100_operators-manual_1309061113.webp)
CPP100
SECTION 12
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
12.1
Appendix 4
Event logging
The following table contains a list of the events that may be logged using the RollCall PC log viewer application
software.
Field
Values
Description
INPUT=
OK
LOST
A valid input signal is present
No valid input signal is present
STD=
625
525
PAL-N
PAL-M
NTSC
PAL
The current selected composite\component input
standard is indicated
AUTO
Unit has been set to AUTO detect the input standard
STDERR
The current selected standard does not match the
input standard.
UNKNOWN
Unit does not recognise the input signal standard.
EXTREF=
OK
The Unit is genlocked to a compatible reference signal
i.e. input signal and reference signal are the same
video standard
N/A
The Unit does not have a compatible reference signal
OR the unit is not configured to genlock to the
reference
LOST
The Unit is not receiving a reference signal
EDH=
OK
The unit is receiving a signal which contains EDH
packets
and no errors are detected
FAIL
The unit is detecting EDH errors
NONE
The unit does not detect the presence of EDH at input
RESET
RESET:AP
RESET:FF
AP & FF EDH error counters in the unit have just been
reset, (normally by a user action). This is sent once
per reset event, and so will only appear for a short
time in the log viewer current status display.
Reset AP EDH error
Reset FF EDH Error