![background image](http://html1.mh-extra.com/html/snell-and-wilcox/prefix-cpp100/prefix-cpp100_operators-manual_1309061034.webp)
CPP100
SECTION 6
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
6.2
Front Panel Control
S N E L L & W I L C O X
C P P 1 0 0
HOME
PRESET
BACK
FREEZE BYPASS
PICTURE
PREFIX
SELECT
Menus are selected by using the spinwheel and the SELECT button. The two arrows to the right of the panel
display indicate that more items are available, to view these use the spinwheel to scroll the display. The bottom
line of the front panel is used to display unit status and warning messages.
The spinwheel can also be used to adjust parameters such as the Horizontal Genlock Offset.
SELECT
Use this button to select a menu item, select a parameter or turn a feature on.
PRESET
Use this button to choose the factory preset for the chosen parameter
HOME
Return the menu to the NORMAL panel display
PREV
Go Back up the menu structure one level
Panel Lock
A facility exists where the front panel can be locked out. This may be useful where accidental depression of
one of the control buttons could occur or where the unit will be under remote control. To enter this mode press
HOME together. A status message, “PANEL LOCKED” , will be displayed on the front panel. To
unlock the front panel press HOME together again.
Picture
Button
Press
FREEZE
On / Off
BYPASS
On / Off
FREEZE
This performs a full frame picture freeze at the input to the PREFIX. The freeze button has a status LED, when
this is illuminated Freeze is ON, when the LED is extinguised Freeze is OFF. A status message, “FREEZE” ,
will be displayed on the front panel.
BYPASS
This button is used to turn the signal processing ON and OFF. When Bypass is turned ON all the filters are
effectively turned OFF. This allows for a whole picture comparison of pre-processed against unprocecessed
without using the key window facility. When Bypass is on the green status LED in the button flashes. A status
message , “BYPASS” , will be displayed on the front panel.
Panel Display
SPINWHEEL