![background image](http://html1.mh-extra.com/html/snell-and-wilcox/prefix-cpp100/prefix-cpp100_operators-manual_1309061038.webp)
CPP100
SECTION 6
CPP1OPS
25/10/06
www.snellwilcox.com
Version 1 Issue 6
6.6
Linear
This is the top level Linear Filter menu when the
filter is turned OFF.
If the Linear filter is turned on in one of the three
operating modes the top level Linear Filter menu
will show the different options available for that
operating mode.
To go directly to this menu PRESS and HOLD the
LINEAR button on the front panel.
The Linear filter can be turned ON/OFF directly
from the front panel by pressing the LINEAR
button.
Linear : Mode
The default operating mode is Brickwall
Linear : Brickwall CutOff
The Brickwall filter has two sets of low pass filters.
The first set of Low Pass (LP) has a variable boost
available. The second set of Extra Low Pass (ELP)
filters has a fixed level of boost.
Low Pass (LP)
Range 4.2 MHz to 2.5 MHz
Step 0.1
MHz
Boost Variable, 1dB to 6dB
Extra Low Pass (ELP)
Range 2.4 MHz to 0.9 MHz
Step 0.3
MHz
Boost Fixed
Preset Low Pass 4.2 Mhz
Linear : Brickwall Boost
Range 1dB , 2dB , 3dB , 4.5dB , 6dB
Preset None
Variable Boost is only available with the
Low Pass Brickwall filters.
Linear : Gaussian LP Gain
Range -4dB to -40dB
Step -4dB
Preset -4dB
Linear : Gaussian HP Gain
Range 1dB , 2dB , 3dB , 4.5dB , 6dB
Preset 1dB
Linear:Mode
▶
Off
▶
Brickwall
▶
Gaussian LP
▶
Gaussian HP
Linear
▶
Mode
Mode:Brickwall
▶
Mode
▶
CutOff
▶
Boost
Mode:Gaussian LP
▶
Mode
▶
Gain
Mode:Gaussian HP
▶
Mode
▶
Gain