background image

   

 

 

Advanced SDI Quad Screen Multiviewer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3827.                                                                                                                                                                                                                                                                                                                                 

 

© 2012 Avenview Inc. All rights reserved

.   

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or 
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications 
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted 
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims 
any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular 
purpose, or infringement of any intellectual property right. Reproduction of this manual, or parts thereof, in any form, without the express written 
permission of Avenview Inc. is strictly prohibited.

 

Model #: SDI-SPLITPRO-4S 

 

Summary of Contents for SDI-SPLITPRO-4S

















Reviews: